Align the print head on a Canon PIXMA TS4150i
If printed lines are offset, print an alignment sheet, then scan it on the printer glass. The two corner marks show which way the sheet goes.
Browse a printer family
Browse printing, scanning and setup help for the PIXMA TS4150i and related TS4320. Each guide names the printer used in the demonstration.
Watch videos for this printer family14 guides for setup, everyday tasks and troubleshooting.
If printed lines are offset, print an alignment sheet, then scan it on the printer glass. The two corner marks show which way the sheet goes.
Find the everyday controls for wireless setup, paper size, copies and stopping a job. The lamp beside each symbol tells you which part of the printer needs attention.
Missing colour or gaps in a nozzle check can call for cleaning. Start with the two-flash cleaning cycle and check a fresh pattern before using deep cleaning.
Use Canon PRINT on an iPhone to add the printer to your home Wi-Fi. If the printer still remembers an old router, clear that connection before adding it again.
The two copy buttons work directly on the printer. For a document or photo on your iPhone, use Canon PRINT to choose the paper settings. Scans travel back to the phone.
A full reset clears the printer’s saved settings, including its Wi-Fi connection. Use the Stop button and count the Alarm lamp flashes to select the full reset.
Unpack the TS4150i, fit the starter cartridges and load paper in the front cassette. Then use an iPhone to join home Wi-Fi and send the first print.
If paper won’t fit in the front cassette, open the blue guides first. Set the length for your paper and bring the side guides in until they just touch the stack.
Print a test page from the control panel. Its black grid and colour bands let you see which part of the print is missing before you run a cleaning cycle.
A blinking power lamp can mean the printer is starting, copying or shutting down. Check what the printer was doing and watch how the light settles.
Lift the scanner unit and seat each cartridge at a slight angle. Once the holders are closed, Canon PRINT can show the estimated level of each ink.
To clear an old wireless connection, hold Stop and release it on the fifteenth Alarm flash. This selects the network reset and lets you set up Wi-Fi again.
Use Canon PRINT to scan from the flatbed to your iPhone. Add another original to the same scan or finish and choose where to save the result.
Enable Wireless Direct, print your printer’s own network name and password, then join that network from your phone to print without a router.
Open your printer’s hub to see its guides and related tutorials from this collection.