A little preparation

Before you start

  • Ink installed and three sheets of plain paper for the network report.

Step 1:Enable Wireless Direct

With the printer on, hold Stop, the triangle-in-a-circle button. Count the flashes of the Alarm lamp. Release after the twelfth flash, before the thirteenth. When the power lamp flashes, press Color to turn Wireless Direct on.

Watch this section at 0:52

Load at least three sheets of plain paper. Confirm the matching paper size with OK if its lamp is flashing. Hold Paper Select for about two seconds, then release. Wait for the network configuration pages to finish printing.

Watch this section at 2:57

Step 3:Find the printer’s network on your phone

On the second sheet, find the Access Point Mode or Wireless Direct section. It should show that the feature is enabled and give a network name (SSID) and password. In your phone’s Wi-Fi settings, choose that exact name and enter the password printed beside it.

Watch this section at 4:21

Step 4:Select the printer and send the job

On iPhone, open your document in Files, tap Share, then Print. Tap the printer selector and choose the Canon printer. You can also search for the printer in Canon PRINT while connected to its network. Your phone can rejoin your usual Wi-Fi when you finish.

Watch this section at 5:05

Turn Wireless Direct off

Hold Stop again, release on the twelfth Alarm flash and press Black. After the change takes effect, the printer’s Direct network should disappear from the list of available Wi-Fi networks.

A little extra help

Questions & troubleshooting

The report says Wireless Direct is disabled. Where is the password?

Run the twelve-flash operation again and press Color. Print a fresh report and use the name and password under the enabled Direct section.

Why did my phone leave my home Wi-Fi?

The printer itself supplies the Wi-Fi network for this connection. Rejoin your router for normal network access, and reconnect to the printer’s Direct network the next time you use this method.

References