Step 1:Check what the printer was doing

Think back to what you did just before the light began blinking. Starting a copy makes the power button flash while the printer works. It can also flash after you press Power, while the printer starts up or moves the carriage into place before shutting down. Give that operation time to finish.

Watch this section at 0:12

Step 2:If it flashes quickly, check the front door

Look at the cartridge-access door at the front. An open door can make the power light flash rapidly. Close it fully. If this started just after changing ink, check that the cartridges have clicked securely into their slots, then close the door again.

Watch this section at 1:13

Step 3:Identify the light that keeps flashing

Watch the button with the power symbol. The separate wireless indicator can flash while the printer is looking for a network. If that is the light you see, use the DeskJet 2600 blinking Wi-Fi light guide.

Watch this section at 1:34

Step 4:If the DeskJet stays idle with the power light blinking

If there is no job in progress and nothing changes after about five minutes, disconnect the power cable at the back, reconnect it and let the printer start again. Check whether it settles and responds to a copy request. Avoid interrupting an active copy or shutdown.

Watch this section at 2:15

References