A little preparation

Before you start

  • A Windows computer connected to the intended Wi-Fi network.
  • The printer powered on with its ink setup completed.
  • Internet access to the official Epson support page for your country.

Connect using Epson’s setup software

Connect your Windows computer to the Wi-Fi network you want the printer to join. Put the printer into Wi-Fi pairing mode, download the setup package for your exact model and country, and use its automatic Wi-Fi connection option.

Step 1:Turn the printer on and start pairing mode

Wait for the green power-ring light to become steady. Hold the Wi-Fi button for about five seconds until the Wi-Fi lights begin flashing in the pairing pattern shown at the start of the video.

Watch this section at 0:20

Step 2:Find your model on the correct Epson support site

Open Epson’s support site for your country. Use the country selector if needed, search for your exact printer model and open its support page. Check that the selected operating system matches the Windows computer you are using.

In the UK example, the presenter downloads Epson Product Setup. In the US ET-2400 example, he selects the operating system and chooses the Drivers and Utilities Combo Package Installer. Use the corresponding setup package offered for your own model and operating system.

Watch this section at 1:09

Step 3:Open the download and follow its initial checks

Run the downloaded installer and respond to the Windows permission prompt. Read the installer’s terms and continue if you accept them. The presenter deselects the optional items shown during the initial setup checks, then selects Next.

Confirm the printer is on and its ink tanks have been filled when the installer asks. Let it download the required software. Keep the computer on the Wi-Fi network you want to transfer to the printer.

Watch this section at 2:45

Step 4:Choose automatic Wi-Fi connection

Select Connect via Wi-Fi automatically when that choice appears, then select Next. The video also points out an option for a printer already connected to Wi-Fi; the demonstrated walkthrough uses automatic setup from the pairing state.

Follow the installer’s connection instructions while it finds the printer and transfers the network settings. Leave the printer and computer on and wait for the next setup screen.

Watch this section at 3:59

If the Wi-Fi lights stop alternating

The presenter returns the printer to its original pairing pattern when the lights stop alternating. If both Wi-Fi lights flash together, press the Wi-Fi button once to clear that state, then hold it for about five seconds again. Continue once the alternating pattern shown at the start returns.

Step 5:Choose the software you need

When the software-selection screen appears, the presenter recommends the required software and scanner utilities. He also discusses software updates and Epson ScanSmart as additional selections. Choose the available items you want, then select Next.

Continue through the remaining firmware and registration screens. The presenter skips product registration and finishes the installer; registration is not used as a condition of completing this demonstration.

Watch this section at 5:09

Check for the steady Wi-Fi light

At about 5:38, the presenter points out the upper Wi-Fi light staying green as the connection confirmation. Finish the installer and check that your printer reaches that connected state.

The source finishes after connection and software setup. It does not demonstrate a Windows test print or scan in this recording, so those are separate checks once you are connected.

A little extra help

Questions & troubleshooting

Should I download the ET-2861 package for my ET-2400?

Use the exact model and country on Epson’s support site. The source shows the ET-2861 UK page and the ET-2400 US page as regional examples; it does not establish that their downloads are interchangeable.

The two Wi-Fi lights are flashing together. What does the presenter do?

He presses the Wi-Fi button once to clear that state, then holds it for about five seconds to restore the alternating pairing pattern before continuing.

Do I need to register the product to complete this setup?

The presenter skips registration and finishes the installer. Follow the choices shown by the setup package for your own model.

References