Before you start
- Ink in the tanks.
Use all the colours regularly
Professor Printer recommends printing about once a week, including a page that uses the colours as well as black. This keeps ink moving through the print heads. It is a maintenance routine rather than a guarantee that a printer cannot clog.
If the printer is sitting unused
For a printer that is not being used, the suggested alternative is a regular head cleaning roughly every one to two weeks. If you already print regularly, additional scheduled cleaning is not the routine recommended here. Cleaning uses ink, so check that the tanks contain ink first.
Step 1:Run the short head cleaning
Turn the printer on. Hold the Stop button, marked with a triangle, for about five seconds. Release it when the power light begins flashing. The printer will make operating noises while the cleaning runs.
Step 2:Wait until the power light stops flashing
The short cleaning takes roughly two minutes in this demonstration. When the flashing stops, the cycle is complete. If print quality is already poor, use a nozzle check to assess it rather than assuming this preventive routine has cleared every blockage.


