Before you start
- The printer and a Windows computer connected to the same Wi-Fi.
- An Epson Printing preferences window that includes Maintenance.
- Paper for nozzle checks and sufficient ink for the intensive cycle.
Use the Epson Maintenance tab
The route shown is Windows Printers & scanners → your Epson printer → Printing preferences → Maintenance → Power Cleaning. The video shows where the utility is and explains how to use it; it does not film a complete cleaning cycle or a new before-and-after test.
Step 1:Check the ink and print a baseline nozzle check
Print a nozzle-check pattern first so you have a baseline for the gaps or poor print quality you are trying to improve. Keep that sheet for comparison.
Step 2:Open Printers & scanners in Windows
Connect the printer and Windows computer to the same Wi-Fi. Search Windows for Printers & scanners and open it. If the Epson is not already listed, choose Add device, select the detected printer and wait for it to install. The source describes around one or two minutes for that installation.
Step 3:Choose the printer entry with Epson preferences
Select your Epson from the installed printer list and open Printing preferences. The recording has two entries for the same printer. Choose the entry whose Printing preferences opens the Epson settings window with a Maintenance tab.
Step 4:Open Maintenance and choose Power Cleaning
Open the Maintenance tab, then choose Power Cleaning. Use the utility’s displayed checks and prompts to run the cleaning. The presenter describes it as an intensive cycle taking around ten to fifteen minutes; the full cycle is not shown in this recording.
Step 5:Compare a nozzle check and allow time before repeating
The presenter says you can print a nozzle check immediately after cleaning. Compare it with your baseline. If the result is still poor, wait twenty-four hours and print another nozzle check before deciding whether another Power Cleaning is needed.
Judge the pattern from your own printer
Look for improvement in the nozzle-check pattern rather than assuming the utility has solved the problem. The presenter describes a previous successful cleaning of his second-hand printer; that account is separate from a newly filmed before-and-after result in this video.
Questions & troubleshooting
Printing preferences opens a different window. What does the video suggest?
The demonstration has two installed entries for the same printer. Select the one whose Printing preferences opens the Epson window with Maintenance. The source does not provide a separate driver-download procedure.
Can I print a nozzle check straight after Power Cleaning?
Yes, the presenter explicitly says you can. If it still looks poor, his advice is to wait twenty-four hours, check again and only then consider repeating Power Cleaning.
Is this a physical or manual printhead wash?
No. This guide follows the Power Cleaning function in the Epson Windows utility. It does not remove or wash a printhead by hand.


