Find the printer’s own password
Look for the Password sticker inside the front flap. This is the printer administrator password, not your router’s Wi-Fi password. If the label is missing, the detailed report offers another lookup method for the default value on the printer shown.
Step 1:Check the printer labels
Lower the front flap and look for Password. If it is not there, check the other accessible inside, side and rear labels. Read your own printer’s value.
Step 2:Print the detailed report if the label is missing
Turn the printer on and wait until it is idle. Load at least two sheets in the rear feeder. Hold Information for about ten seconds, until it starts feeding paper. A short press produces a different, shorter report.
Step 3:Find the WPS PIN on the long report
Look for WPS PIN on the detailed report. In this printer’s demonstrated default setup, that value matches the Password sticker and supplies the value used at the printer-password prompt. Use the number printed by your own device; do not reuse another printer’s code.
Step 4:Use the current password if it has been changed
The printed label and report method concern the default setup. If someone has changed the administrator password, use that current password. Printing a report does not change it.
Questions & troubleshooting
Is this the password for my home Wi-Fi?
No. The router password joins the home network. The printer administrator password lets Smart Panel or Web Config access the printer settings.
Why does my printed sheet not show the value?
Use the long Information-button hold, around ten seconds until paper starts feeding. The shorter press produces a different report.
Does the WPS PIN always equal the administrator password?
The report and label match on the printer used for this method. Do not treat that as a universal rule for every Epson model or a password that has since been changed.


