Before you start
- An existing Wi-Fi or Wi-Fi Direct connection to the printer.
- The current printer administrator password.
- Epson Smart Panel or a browser that can reach the printer’s IP address.
Change the printer administrator login
This changes the printer’s administrator password, not your home Wi-Fi network password. The method requires a working network connection and the current administrator password. It is an authenticated settings change, not a demonstrated way around a forgotten password.
Step 1:Open the printer’s advanced settings
Connect to the printer through the existing Wi-Fi or Wi-Fi Direct connection. In Epson Smart Panel, select the printer and open Advanced settings. Alternatively, enter the printer’s current IP address in a browser to reach its settings page. The related IP-address guide shows how to find that address.
Step 2:Sign in with the current administrator password
Choose Administrator Login and enter the current printer administrator password. If it has not been changed, the source locates that value on the printer’s Password sticker inside the front flap. Choose OK.
The presenter enters an incorrect value on the first attempt and corrects it. If login fails, check your own current value rather than copying the example shown in the recording.
Step 3:Switch to Advanced Settings and open administrator settings
On the printer’s settings page, change the Basic Settings view to Advanced Settings. Open Administrator Settings and the administrator-password change form shown in the video.
Step 4:Enter the current password and the new value twice
Enter your current password in its field. Enter the new password and repeat it in the confirmation field so both entries match. The source describes a length of eight to twenty characters and says letters and numbers can be used.
Step 5:Save the new administrator password
Check that the two new-password entries match, then choose OK to submit the change. The recording explains this form and its submission; it does not show a separate later login using the new password.
What about the default-settings option?
The presenter also points to restoring default settings and discusses forgotten passwords. That recovery is not worked through in this recording. Do not treat the connection-reset button sequence from a different guide as a demonstrated administrator-password recovery method.
Questions & troubleshooting
Does this change my router’s Wi-Fi password?
No. It changes the password used to administer the printer. Your router’s network password is a different credential.
Can I follow this if I do not know the current password?
The demonstrated method asks for the current password to sign in and again in the change form. The video mentions restoring defaults but does not demonstrate a forgotten-password recovery procedure.
Can I use a computer rather than the phone?
The presenter says the same printer settings page can be opened in a computer browser using the printer’s IP address. The demonstrated route begins in Epson Smart Panel on the phone.


