Before you start
- Paper for the detailed network report.
- A phone or computer with Wi-Fi and a browser.
- Your printer administrator password and your router’s current Wi-Fi password.
Connect through the printer’s own settings
Join the printer’s Wi-Fi Direct network, open its printed local IP address in a browser, then choose your router in Web Config. This method uses the printer’s settings page instead of Epson Smart Panel.
Step 1:Enable Wi-Fi Direct
Turn the printer on and wait until its Wi-Fi lights are no longer flashing. Hold Wi-Fi and Information together until the network lights flash alternately, then release them. Wait for the lower Wi-Fi Direct indicator to stay on.
Step 2:Print the detailed network report
Load three sheets in the rear feeder. Hold Information for about ten seconds, until the printer starts feeding paper. Keep the detailed report: you need its WPS PIN and the IP address listed under Wi-Fi Direct.
Step 3:Join the DIRECT Epson network
On your phone or computer, open the Wi-Fi network list and choose the DIRECT Epson network belonging to your printer. Enter your printer’s own password from its label or detailed report. In this setup, the report’s WPS PIN matches the password label; use your own printer’s value.
Step 4:Open the printed Wi-Fi Direct IP address
Type the IP address printed under Wi-Fi Direct into the browser address bar. Use the address from your report, not an example address from another printer.
Step 5:Sign in and open Wi-Fi setup
Choose Administrator Login and enter the printer’s current administrator password. Switch from Basic Settings to Advanced Settings, then open Network Settings → Wi-Fi → Setup.
Step 6:Select your router and enter its password
Choose your home Wi-Fi network from the list. Enter its current network password in both password fields so they match. Choose Next, review the connection details and confirm OK. If a password-save prompt appears, it is separate from applying the printer settings.
Step 7:Wait for the upper Wi-Fi light to stay on
The settings page may disconnect while the printer applies the change. Wait for the upper Wi-Fi indicator to become steady green. That is the router-connection result to look for; the lower indicator belongs to Wi-Fi Direct.
Questions & troubleshooting
Which IP address should I enter?
Use the address listed under Wi-Fi Direct on your own printer’s detailed report. The router-network address elsewhere on the sheet is a different connection.
Are the printer password and Wi-Fi password the same?
They are separate credentials. The printer password opens its settings; the router password lets it join your home network.
Why did the browser page disconnect after I pressed OK?
Applying the wireless settings can interrupt the temporary connection. Check the upper Wi-Fi indicator for a steady green light before repeating setup.


