Before you start
- Epson Smart Panel already connected to the printer.
- A4 or Letter paper and ink in the tanks.
Step 1:Start with a nozzle check
Connect the printer in Epson Smart Panel before starting. Select the printer in the app, load A4 or Letter paper into the rear feeder and tap Nozzle Check. Look at the grid near the top-left of the printed page. Breaks or faded parts show where the pattern is incomplete.
Step 2:Run Head Cleaning
On the same printer page in Epson Smart Panel, tap Head Cleaning and confirm Yes. Leave the printer on while it runs. Expect operating noises and a flashing power light for roughly two to three minutes.
Step 3:Print another check and compare it
Once the power light stops flashing, load another sheet and run Nozzle Check again. Compare the same lines with your first print. A more complete pattern indicates improvement; the goal is a pattern without the missing or faded segments.
Stop before repeated cleaning becomes excessive
If the pattern is still badly incomplete, the next route covered for this printer is Power Cleaning from a computer. It is not started from the phone in this walkthrough. Use the linked computer guide for its ink-level requirements and limits.


