Step 1:Find the router’s WPS button

Turn on the printer within range of the router and find the button labelled WPS on the router. Its position varies. If your router has no push-button WPS option, use the ET-2400 Wi-Fi setup guide for the app-based route.

Watch this section at 0:30

Step 2:Start push-button pairing at the router

Press the router’s WPS button briefly. The router in this example takes a press of about one or two seconds and starts flashing blue. Your router may signal pairing differently. Move to the printer while the pairing window is open.

Watch this section at 1:03

Step 3:Hold Wi-Fi on the ET-2400

On the printer, press and hold Wi-Fi until the wireless indicators begin flashing, then release the button. Give the printer time to establish the connection. The example takes about ten seconds after the lights start flashing.

Watch this section at 1:21

Step 4:Check the network connection

Wait for the Wi-Fi indicator to settle. On a phone or computer connected to the same router, look for the ET-2400 when adding a printer. If you need to see which network the printer joined, print its network information sheet.

Watch this section at 1:53

References