Restore printer discovery in Smart Panel

If Smart Panel cannot find the printer during setup, restart the printer and app setup together. This method reinstalls Smart Panel, allows device discovery and puts the printer back into pairing mode.

Step 1:Reinstall Epson Smart Panel

Turn the printer off. Remove Epson Smart Panel from the phone and install it again from the app store. Select Smart Panel, rather than Epson iPrint.

Step 2:Enable Wi-Fi, Bluetooth and discovery permissions

Connect the phone to the Wi-Fi network you want the printer to use and turn on Bluetooth. Open Smart Panel, accept its terms to continue and allow its local-network, Bluetooth and location-while-using prompts. Notification permission is optional.

Step 3:Start the printer’s Wi-Fi pairing mode

Turn the printer on and wait for its power light to settle. Hold the Wi-Fi button until the network lights begin flashing.

Step 4:Search for the printer again

In Smart Panel, choose Set up a new product, then Continue. Allow Bluetooth discovery when prompted. Select the Epson printer when it appears and continue to Wi-Fi connection settings.

Step 5:Finish the separate Wi-Fi setup

Finding the printer is the discovery step. Continue through the printer-password and router-password prompts to finish connecting it; the Wi-Fi setup guide covers that remaining process.

A little extra help

Questions & troubleshooting

Does finding the printer mean Wi-Fi setup is complete?

No. Continue to Wi-Fi connection settings and complete the password prompts. Look for the setup-complete message and steady upper Wi-Fi light at the end.

References