A little preparation

Before you start

  • A Windows computer connected to the printer with Epson Maintenance tools available.
  • Two sheets of A4 or Letter paper.

Step 1:Open the Epson alignment tool

With the printer and Windows computer on the same Wi-Fi network, open Printers & scanners. If necessary, select Add device and wait for the printer to install. Open your printer, then Printing preferences → Maintenance → Print Head Alignment.

If Windows lists two entries, use the one that opens the Epson Maintenance tools. In this demonstration it is the entry without the shield icon. If those tools are missing, use the Epson software installation guide linked below.

Step 2:Print the vertical alignment sheet

Load A4 or Letter paper in the rear feeder. Select Next in the alignment tool, then Print. Wait for the vertical alignment pattern to finish.

Step 3:Choose the fullest block in each of the seven rows

For each row, find the numbered block with the fewest visible lines and the most complete fill. Enter that block number in the corresponding row of the computer dialog. Work through all seven rows, then select Next.

Step 4:Print and choose the horizontal pattern

Load another sheet and print the horizontal alignment pattern. Choose the numbered pair of rectangles that meets most evenly, without an obvious gap or overlap. Enter its number in the dialog and select Finish.

Check a fresh print

The alignment is complete once the selections have been saved. Check the alignment of a new print. If parts of the nozzle pattern are missing, head cleaning addresses that separate ink-flow problem.

References