A little preparation

Before you start

  • A two-page document and a working computer-to-printer connection.
  • Paper loaded in the rear feeder.

Print each side in a separate pass

For a two-page document, print page one first, turn the sheets over and reload them, then print page two. The ET-2400 workflow here is manual: there is no automatic paper-flipping step.

Step 1:Print only page one

Load paper in the rear feeder and open your document’s Print dialog on the computer. Select the Epson printer. Under Pages, choose a custom range of 1. Set the number of copies you want, check the paper settings and print.

Step 2:Reload the printed sheets top edge first

Collect the first-side prints. Turn them over and put them back into the rear feeder with the printed side facing down and the top edge of the document entering the printer first. Keep multiple copies in the same orientation.

Step 3:Print only page two

Return to the Print dialog. Change the custom page range to 2 and use the same copy count as the first pass. Print onto the reverse of the sheets you reloaded.

Step 4:Check both sides and their orientation

Each sheet should now contain page one on one side and page two on the other. Check that both sides are upright before repeating the process for more copies. Selecting every page on the first pass would put them on separate sheets.

A little extra help

Questions & troubleshooting

Why are the pages coming out on separate sheets?

Select only page 1 for the first pass, then only page 2 after reloading. Printing all pages at once does not turn the paper over.

Does this enable automatic duplex?

No. You reload the sheets manually between the two print passes. The steps use a computer print dialog; phone screens are not part of this walkthrough.

References