Read the tanks at the front

Check the four transparent tank windows at the front of the printer. This method reads the ink itself rather than relying on a software estimate.

Step 1:Find the surface of each ink colour

Look across each tank window for the line between the ink and the space above it. Compare that level with the marks beside the window.

Step 2:Make a difficult level easier to see

If staining or dark ink makes the level difficult to distinguish, the method shown is to gently rock the printer a little from side to side while watching the ink surface move. Use that small movement to identify the level rather than treating a stain on the window as the current level.

Step 3:Refill before the level drops below the lower mark

Check every colour, not just black. Arrange a refill before a tank falls below its lower line. The upper and lower marks give you a visual reference for the amount remaining.

A little extra help

Questions & troubleshooting

Why is the level hard to see?

Dark ink or staining can obscure the boundary. Look for the moving ink surface through the tank window; a fixed stain does not show how much ink remains.

References