A little preparation

Before you start

  • The HP app on your phone.
  • Your intended Wi-Fi network name and password.
  • Paper to print the Wi-Fi Direct information sheet.

Start with a direct connection

This route uses Wi-Fi Direct as the first connection between your phone and printer, then transfers the printer to your chosen Wi-Fi network. The phone walkthrough uses the HP app and the printer’s built-in settings page.

Step 1:Join the printer’s Wi-Fi Direct network

Hold Information for three seconds, then press Information and Cancel together to print the direct-network name and password. Hold Information for three seconds again, then press Information, Cancel and Resume together to enable Wi-Fi Direct.

In your phone’s Wi-Fi settings, select the matching DIRECT ENVY network and enter the password from the printed sheet.

Step 2:Add the printer in the HP app

Install the genuine HP app from your phone’s app store if you do not already have it. Open the app, choose Add device, select the discovered printer and choose Add printer. Open its printer page.

Step 3:Open the Wireless Setup Wizard

Scroll to Printer settings, then choose Advanced settings. On the printer’s built-in web page, open Network, expand Wireless (802.11), and select Wireless Setup Wizard.

Step 4:Enter this printer’s administrator PIN

When asked for the PIN, carefully lift the printer’s upper access unit using the side handles. Read the PIN label inside and enter that number into the form, then submit it. Close the unit carefully afterward.

This is a different credential from the Wi-Fi Direct password and your home Wi-Fi password. If it is rejected, reread the label and correct the entry; do not copy the number shown in someone else’s demonstration.

Step 5:Select your Wi-Fi network and finish

Continue with Next. Select your intended network in the list before pressing Next again. Enter that network’s wireless password, review the connection details and select Finish.

Return to the HP app to check the printer. The demonstration completes the wireless wizard, while the app still shows a separate “Setup incomplete” message. Treat that as a separate app/setup item rather than proof that every part of setup is finished.

References